Mitsubishi Lancer Evo 10 P0171 Engine Trouble Code
What is Mitsubishi Lancer Evo 10 P0171?
Mitsubishi Lancer Evo 10 P0171 indicates potential catalytic converter failure. If completely failed, your vehicle may not run properly and fuel economy will suffer significantly. Average replacement cost is $2,000–$2,140. This repair requires professional service and should not be delayed.
P0171 on the Mitsubishi Lancer Evo 10
On the Mitsubishi Lancer Evo 10, a secondary air injection pump that has seized due to moisture ingress is a common trigger for P0171. The fault is usually only present on cold starts and clears itself after two to three warm-up cycles, making it easy to overlook.
Code Information
| Code Type: | OBD-II Powertrain (P) Trouble Code |
| System: | Powertrain |
| Vehicle: | Mitsubishi Lancer Evo 10 |
| Brand: | Mitsubishi |
| Model: | Lancer Evo 10 |
| Code: | P0171 |
P0171 Mitsubishi Lancer Evo 10 Symptoms
Check Engine Light
Illuminated Mitsubishi Lancer Evo 10 dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration on the Mitsubishi Lancer Evo 10
Starting Problems
Difficulty starting the engine
Poor Fuel Economy
Increased fuel consumption on the Mitsubishi Lancer Evo 10
Increased Emissions
Failed emissions test due to P0171
P0171 Code Structure
Understanding what each digit means in the P0171 powertrain trouble code:
| P | 0 | 1 | 7 | 1 |
|---|---|---|---|---|
| Powertrain Code | Intake Valve Control Solenoid Circuit Low | Fuel Rail/System Pressure — Too High | Cylinder 10 Contribution/Balance Fault | Crankshaft Position Sensor A Circuit Low Input |
How to Fix Mitsubishi Lancer Evo 10 P0171
Diagnostic Steps:
The catalytic converter has oxygen sensors before and after it. When warm and in closed-loop mode, the upstream O2 sensor reading should fluctuate, while downstream should remain steady.
Repair Solution:
VSS concerns may stem from noisy input signals caused by RFI/EMI from ignition wires, charging circuits, or aftermarket equipment. Verify VSS reads 0 mph when transmission is in Park.
Technical Notes:
P0171 DTC specifically relates to camshaft timing. When cam timing is over-retarded, the check-engine light illuminates and this code sets. Verify VCT solenoid operation and check for contamination.
Mitsubishi Lancer Evo 10 P0171 Repair Cost
Fuel injector cleaning service on the Mitsubishi Lancer Evo 10 costs $150–$300 for an ultrasonic bench-clean of all injectors with flow-test certification. On-car induction cleaning is a cheaper ($80–$120) first step but is less thorough for heavily fouled injectors.
P0171 Description
P0171 OBD-II Trouble Code: With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxyge
Main Cause
The primary reason for P0171 OBD-II Engine Trouble Code is: Fuel Rail/System Pressure — Too High.
Common P0171 Misdiagnosis on the Mitsubishi Lancer Evo 10
Replacing the PCM/ECU on the Mitsubishi Lancer Evo 10 for a persistent P0171 is a last-resort action that is often performed prematurely. Statistically, less than 2% of P0171 faults on this platform originate in the ECU; wiring, sensors, and mechanical causes account for the remainder.
DIY Repair Guide: P0171 on Mitsubishi Lancer Evo 10
The fuel pressure test on the Mitsubishi Lancer Evo 10 requires a Schrader-valve type fuel pressure gauge ($25–$40) connected to the fuel rail test port. With the ignition ON (engine off), pressure should hold above 30 PSI for two minutes. A rapid drop confirms a leaking injector or failing regulator as the root cause of P0171.
Preventing P0171 on the Mitsubishi Lancer Evo 10
Ensure the Mitsubishi Lancer Evo 10 oil cap and dipstick tube seal are airtight. Even a small crank-case vacuum leak can cause the PCM to log P0171 and, over time, allows moisture-laden air to degrade the engine oil faster than the scheduled service interval.
Frequently Asked Questions — Mitsubishi Lancer Evo 10 P0171
A: It depends on the severity. If the check-engine light is steady, it is generally safe to drive to a workshop within the next few days. If the light is flashing, pull over safely as soon as possible — a flashing light indicates an active misfire that can cause expensive catalytic converter damage within minutes.